Recover Lost Data from SK Hynix Beetle X31 SSD



updated on 2024-02-12 to Removable Device Data Recovery

It can be scary to lose data, especially when it happens out of the blue. Even though SK Hynix Beetle X31 SSDs are known for being reliable, problems can happen with any storage device and cause data loss. The thought of losing important files can be scary, whether because they were deleted by mistake, formatted, corrupted, or something else out of your control.

Although there is still hope, it's often possible to regain lost data on SK Hynix Beetle X31 SSDs if you know how and have the right tools. Before getting into data recovery ways, it's important to know how the SK Hynix Beetle X31 SSD is put together and how it works.

Recover Lost Data from SK Hynix Beetle X31 SSD

This solid-state drive (SSD) stores data in NAND flash memory, which makes it faster to read and write than regular hard disk drives (HDDs). The Beetle X31 SSD uses cutting-edge technology to protect data and make it reliable, but like all storage devices, it can lose data in some situations.

Common Causes of Data Loss on SK Hynix Beetle X31 SSD

SK Hynix SSDs are solid-state drives that store data in NAND flash memory. They work well, don't use much power, and last long. That being said, they can still lose info. SK Hynix SSD data loss is often caused by the following:

Physical Damage

The controller, memory chips, or connections are some of the hardware parts of the drive that are broken. Power surges, water damage, fire damage, and impacts are all physical damage. We can use high-tech tools to get to the raw data on the memory chips and rebuild the drive's logical structure to regain data that has been damaged physically.

Logical Errors

These are mistakes in the drive's file system or partition table that stop the operating system from reading it. Logic mistakes include deletions by chance, formatting, virus infections, software problems, etc. It uses specialized software tools to scan the drive, retrieve lost files and folders, and retrieve data lost because of logical mistakes.

Firmware Errors

These are problems with the software that controls how the drive works. Bad sectors, corruption, encryption, and other problems can happen with software. We have different methods to get around or fix software problems to get to the data on the drive and recover lost data.

SK Hynix SSD Data Recovery Working

A solid-state drive (SSD) from SK Hynix stores information on flash memory chips. HDDs read and write data with spinning disks and magnetic heads. SSDs, however, don't have any moving parts and are faster, quieter, and last longer. But SSDs also have some problems, like limited write cycles, vulnerability to power spikes, and difficulty retrieving data that has been lost or damaged.

Data recovery is recovering lost or inaccessible data from an SK Hynix SSD. Because SK Hynix SSDs have a complicated design and encryption features, getting the data back can be hard. HDDs store data in set sectors and tracks. SSDs, on the other hand, use a method known as "wear leveling" to spread data out over the flash memory chips.

It means a file's logical address does not match its location on the SSD. SK Hynix SSDs also use a special encryption method to keep the data safe from people who shouldn't have access to it. It means that even if the data is found, reading it without the encryption key might not be possible.

Recover Lost Data from SK Hynix Beetle X31 SSD

There are special tools and software to get around the protection and get to the raw data on the flash memory chips to recover SK Hynix SSD data. You might need mental or physical recovery, depending on what caused the data loss and how much it affected your life.

In physical recovery, you must take the flash memory chips off the circuit board and read them directly with special tools because you can't access the SSD through its interface. It has to be done if the SSD is broken or has serious software problems that keep the computer from recognizing it.

It is called logical recovery when you can connect to the SSD through its port and use software to look for and get back lost files. It is possible if the SSD is not physically broken and the data loss was caused by formatting, virus attack, or logical corruption.

Here are steps to recover lost data from a SK Hynix Beetle X31 SSD with data recovery software.

Step 1. Download and install the reliable SK Hynix Beetle X31 SSD data recovery software - Magoshare Data Recovery. It is fully compatible with macOS and Windows.

Magoshare Data Recovery

  • Unformat SK Hynix Beetle X31 SSD.
  • Recover deleted or lost data from SK Hynix Beetle X31 SSD.
  • Export data from SK Hynix Beetle X31 SSD to your computer.

Step 2. Connect the SK Hynix Beetle X31 SSD to your computer, then open Magoshare Data Recovery. It will recognize the SK Hynix Beetle X31 SSD automatically.

Recover Lost Data from SK Hynix Beetle X31 SSD

Step 3. Select the SK Hynix Beetle X31 SSD and click on Scan button. It will deeply scan the SSD and find all recoverable files including existing files, deleted/lost files, formatted data, etc.

Recover Lost Data from SK Hynix Beetle X31 SSD

Step 4. Once the scan is completed, you can preview all recoverable files. Then select the wanted files and save them by clicking on Recover button. (Select a safe location to save the recovered files)

Recover Lost Data from SK Hynix Beetle X31 SSD

Magoshare Data Recovery is a powerful yet easy-to-use data recovery program. It also can help you recover lost data from Seagate external hard drive, unformat Samsung SSD, recover lost data from PC, Mac, external USB device, memory card, etc.


Losing data on an SK Hynix Beetle X31 SSD can be stressful, but you can often get it back with the right steps. Users can protect their important information and lessen the effects of data loss by learning about its reasons, using effective recovery tools, and taking precautions.

Remember to act quickly but carefully; if you need to, consider getting professional help. Getting back lost data from SK Hynix Beetle X31 SSDs is usually possible if you keep trying and have the right tools.